3648d64d

13.1.7. Removal and installation of a jet of windscreen washer of a windshield

Removal

 PERFORMANCE ORDER

1. Open a cowl.
2. Disconnect a negative cable (-) of the rechargeable battery at the switched-off ignition. It is previously necessary to remove a box of the filter of air of salon.

Before a detachment of a cable find out a protective code of the radio receiver if that is available, address the Section Replacement of the Rechargeable Battery.

3. Remove a lattice of a front spoiler from a cowl, address the Section Removal and installation of a lattice of a spoiler.

4. Disunite the socket (1) at a heater of a jet (2).

5. Take out a connecting element (3) of a water hose from a jet (4).
6. Disconnect and take out a jet by means of the screw-driver from the holder.


Installation

 PERFORMANCE ORDER

1. Insert a jet into a lattice of a spoiler and record.
2. Put on a connecting element a jet.
3. Join the socket of heating of a jet.
4. Establish a spoiler lattice, address the Section Removal and installation of a lattice of a spoiler.
5. Attach a cable of mass of the rechargeable battery at the switched-off ignition. Install into place a box of the filter of air of salon. If it is necessary, enter a code of the radio receiver and determine time on hours.
6. Close a cowl.
7. Check operability of a jet and adjust it, address appropriate section.


Adjustment

 PERFORMANCE ORDER

Address an accompanying illustration.