3648d64d

13.1.44. Removal and installation of a back spoiler

Versatile person

Removal

 PERFORMANCE ORDER

1. Disconnect a negative cable (-) of the rechargeable battery at the switched-off ignition. It is previously necessary to remove a box of the filter of air of salon.

 Before a detachment of a cable find out a protective code of the radio receiver if that is available, address the Section Replacement of the Rechargeable Battery.

2. Open a door of a back and remove its facing, address appropriate section.

3. Turn off 4 plastic nuts (1) of fastening of a back spoiler at the left and on the right.

4. The Torx screw-driver one by one unscrew 3 screws (2) on several turns.
5. Disunite the socket of an additional stoplight.
6. Wring out inside lock levels and wring out from an assembly opening at back doors outside the plug socket of an additional stoplight.
7. Turn off serially to avoid deformations of a back spoiler, 3 screws (2).

Screws are located in a back spoiler and are turned out from a back door outside.

8. Remove a back spoiler from a back door. When closing a door of a back you watch that did not warp in relation to a car roof.


Installation

 PERFORMANCE ORDER

1. Close a door of a back and establish a spoiler on a back door. At the same time you monitor the correct provision of a spoiler and behind that screws came into openings rather deeply.
2. Carefully open a back door, watching that the spoiler did not warp in relation to a car roof.
3. Screw on several turns serially 3 screws.
4. Insert the plug socket of an additional stoplight into an assembly opening and join the socket.
5. Wrap serially three bolts of fastening.
6. Screw 4 plastic nuts at the left and on the right.
7. Establish facing of a door of a back, address appropriate section.
8. Attach a negative cable (-) to the rechargeable battery at the switched-off ignition. Establish into place a box of the filter of air of salon. Enter a code of the radio receiver and determine time on hours.