3648d64d

13.1.39. Removal and installation of the cylinder of the lock of a luggage carrier and door of a back

Removal

 PERFORMANCE ORDER

1. Disconnect a negative cable (-) of the rechargeable battery at the switched-off ignition. It is previously necessary to remove a box of the filter of air of salon. Before a detachment of a cable find out a protective code of the radio receiver if that is available, address the Section Replacement of the Rechargeable Battery.
2. Remove facing of a door of a back or trunk lid, address appropriate section.
3. Disunite the socket at the locking mechanism.
4. If necessary remove the locking mechanism, address appropriate section.
5. Remove an emergency key from the ignition key, address the Section Replacement of the Battery of a Key of the Ignition/remote Control.

6. Insert an emergency key into the lock and turn counterclockwise so that in a groove (1) the opening seemed.

7. Insert into an opening the tool for renting (2), release the cylinder of the lock and take out it from the lock.

The tool for renting can be manufactured independently of a wire of V2A with a diameter of 1.5 mm.


Installation

 PERFORMANCE ORDER

1. Insert an emergency key into the lock cylinder, turn counterclockwise and displace the cylinder in the lock.
2. Turn an emergency key clockwise so that the cylinder was fixed.
3. Take out an emergency key from the lock and insert into the ignition key, address the Section Replacement of the Battery of a Key of the Ignition/remote Control.
4. If it is necessary, install the locking mechanism, address appropriate section.
5. Join the socket at the locking mechanism.
6. Establish into place facing of a cover of a luggage carrier/door of a back, address appropriate section.
7. Attach a negative cable (-) to the rechargeable battery at the switched-off ignition. Establish into place a box of the filter of air of salon. Enter a code of the radio receiver and determine time on hours.