3648d64d

13.1.37. Removal and installation of the lock of a door of a back

Versatile person

Here removal and installation for the Station wagon model is described. Process of installation and removal for other models is similar. Differences are given in the text.


Removal

 PERFORMANCE ORDER

1. Disconnect a negative cable (-) of the rechargeable battery at the switched-off ignition. It is previously necessary to remove a box of the filter of air of salon.

Before a detachment of a cable find out a protective code of the radio receiver if that is available, address the Section Replacement of the Rechargeable Battery.

2. Versatile person: Remove facing of a door of a back, address appropriate section.
3. Sedan: Disconnect a slip at the lock as it is described in the Section Removal and installation of facing of a trunk lid.

4. Turn out 2 screws of fastening (1) and disconnect the lock (2) from a back door.

5. Take out the lock (2) from a door of a back a little and disunite the socket (1) at the lock.

6. Disconnect a cable (1) at the mechanism of locking (2) (the shooter on an illustration) and remove the lock with a cable. (3) – plug of the uniform lock.


Installation

 PERFORMANCE ORDER

1. Fix the lock on a back door, without tightening bolts.
2. Connect a cable to the lock mechanism.
3. Join the socket at the lock.
4. Attach a negative cable (-) to the rechargeable battery at the switched-off ignition. Establish into place a box of the filter of air of salon. Enter a code of the radio receiver and determine time on hours.
5. Carefully close a door, watching the correct position of the lock. If necessary adjust position of the lock.
6. Open a door and tighten fastening bolts the moment of 9 Nanometers.
7. Versatile person: Establish into place facing of a door, address appropriate section.
8. Sedan: Fix a slip at the lock as it is described in the Section Removal and installation of facing of a trunk lid.