3648d64d

13.1.32. Removal and installation of an external mirror

Removal

 PERFORMANCE ORDER

1. Establish an external mirror inside.
2. Disconnect a negative cable (-) of the rechargeable battery at the switched-off ignition. It is previously necessary to remove a box of the filter of air of salon.

Before a detachment of a cable find out a protective code of the radio receiver if that is available, address the Section Replacement of the Rechargeable Battery.


3. Press a mirror inside. To record a mirror in this situation insert wooden whetstone (1) about 10 cm long and clamp it. (2) – facing of an external mirror.

At models with the electric drive of a mirror cast away a mirror inside.

4. Turn out 3 screws of fastening (3), remove a mirror from a door and extend an electric wire from an opening.
5. Disunite the socket.


Installation

 PERFORMANCE ORDER

1. Put a mirror on a door and join the socket.
2. Fix a mirror by three screws on a door and take out wooden whetstone.
3. Attach a negative cable (-) to the rechargeable battery at the switched-off ignition. Establish into place a box of the filter of air of salon. Enter a code of the radio receiver and determine time on hours.
4. Check operation of the mechanism of installation of a mirror and the index of turn.