3648d64d

13.1.34. Removal and installation of a trunk lid

Sedan

Removal

 PERFORMANCE ORDER

1. Disconnect a negative cable (-) of the rechargeable battery at the switched-off ignition. It is previously necessary to remove a box of the filter of air of salon.

Before a detachment of a cable find out a protective code of the radio receiver if that is available, address the Section Replacement of the Rechargeable Battery.

2. Open a luggage carrier and take out the warning sign from the holder.
3. Remove facing of a trunk lid, address appropriate section.
4. Disconnect all wires on a cover.
5. Pull facing on trunk lid wings back. If it is necessary, disconnect all lock levels and remove facing.
6. Mark with a felt-tip pen position of wings on a trunk lid.
7. Ask the assistant to take a cover and turn out 2 bolts from a cover at the left and on the right.
8. Take out a cover from levels on wings up and put on a soft lining.


Installation

 PERFORMANCE ORDER

1. Insert a cover into levels on wings. Expose a cover on tags.
2. Screw two bolts of fastening at the left and on the right, close a cover and expose it, having received a uniform gap on prileganiye perimeter.
3. Tighten fastening bolts the moment of 8 Nanometers.
4. Further installation is carried out in the sequence, the return to removal.
5. Attach a negative cable (-) to the rechargeable battery at the switched-off ignition. Establish into place a box of the filter of air of salon. Enter a code of the radio receiver and determine time on hours.


Gaps

 PERFORMANCE ORDER

Check gaps on a cover prileganiye contour. Values are given in Specifications.