3. Wipe the filter case with a pure rag inside.

1. Insert the new filtering element into an opening in the case of the air filter and press the handle in a support down.
2. Put a cover of the air filter back and wrap it.

1. Turn out 6 screws (1) and (2).

At the 5-cylinder engine turn out 9 screws.

2. Take out sideways a cover (3) of a distributive pipe of the forced air.
3. Uncover the engine (4).

4. Disconnect a hose of absorption of air (1) for what weaken a collar (2) and shift back.

5. Disunite the socket (3) at the measuring instrument of mass of air.
6. Turn off a cover of the air filter (4) (an arrow on an illustration) and remove it.
7. Take out the filtering element from the case.
8. Dump the indicator of service (5), having turned it.

1. Wipe the filter case with a rag.
2. Insert the new filtering element into the filter case. You watch that laying evenly adjoined on a circle.
3. Establish a cover of the air filter and fix by its moment 10 Nanometers.
4. Join the socket of the measuring instrument of mass of air and record it. Move the plug, having checked reliability of its connection.
5. Put on a hose of absorption of air and fix it by a collar.
6. Establish into place a cover of the engine and screw it by hand. You watch to clamping a hose or a wire.
7. Insert sideways a cover of a distributive pipe of the forced air. At the same time you watch that pads entered rubber clips (5).
8. Tighten fastening bolts the moment of 10 Nanometers.