3.27. Replacement of an element of the filter of air of salon / coal filter of purification of air
Replacement is made according to the Schedule of maintenance given above.
|
|
|
|
1. Release clips (1).
|
|
For opening of the central clip press a little up the edge of a drain lying over it (3). |
|
2. Lower a cover of the filter of air of salon (2) in front a little down and disconnect it behind.
|
|
3. Press the filter of air of salon (4) around pads (5) a little, take out from the case (6) and replace new.
|
|
The coal adsorber does not need to be cleared. Through the established intervals of time it needs to be replaced. |
|
|
|
Installation
|
|
|
1. Insert the filter of air of salon into the case.
2. Establish into place a cover of the filter and record clips. |
|
Replacement of the coal filter
Models with the automatic conditioner
|
|
|
1. Unscrew 2 Torx screws of fastening of a cover of a compartment for legs of the forward passenger. Lower a few cover, on the right side pull back and take out from the left channel of warm air.
2. Displace back and uncover near the fan electric motor.
|
|
3. Take out both filters (4) down.
|
|
The filter does not need to be cleared. Through the established intervals of time it needs to be replaced. |
|
|
The accompanying illustration has informative character and cannot correspond to completely considered model. |
|
4. Insert the filter into an opening near the heater fan.
5. Establish into place a cover and displace it back.
6. Establish and fix a compartment cover for legs.
|
|
