1. Remove the top covers of the engine, address appropriate section.
2. Disconnect a casing of the air filter from a cover of a head of cylinders.
3. Remove a hose of ventilation of a case.
4. Disconnect the plug of the sensor of Hall of the camshaft.
5. Disconnect the plug from the shutdown valve with electromanagement.
6. Unscrew screws of fastening and remove cable channel from a cover of a head of cylinders and take him aside.
7. Remove nozzles, address the Section Removal and installation of nozzles.
8. Unscrew screws of fastening and uncover a head of cylinders.

1. Establish into place a cover of a head of cylinders with new sealing laying, without fixing it.

Screws of fastening drag on only after installation of injectors.

2. Establish nozzles, address the Section Removal and installation of nozzles.
3. Fix cable channel to a cover of a head of cylinders.

For installation of cable channel it is necessary to remove fuel injection pipelines again.

4. Join sockets of the valve of shutdown and Hall's sensor on the camshaft.
5. Connect a hose of ventilation of a case.
6. Establish a casing of the air filter.
7. Establish the top covers of the engine, address appropriate section.