1. Uncover a head of cylinders, address the Section Removal and installation of a cover of a head of cylinders.

2. Install the piston of the first cylinder in the provision of VMT. For this purpose switch the transmission to the provision of the neutral course and turn a bent shaft a face key for the central bolt of fastening of a pulley of a bent shaft in the direction of rotation of the engine, i.e. clockwise. Rotate a bent shaft, so far a tag "FROM" on a pulley and the index will not coincide. Do not rotate the engine crankshaft in the opposite direction. Do not rotate the engine crankshaft for a bolt of fastening of an asterisk of the camshaft.

3. In this situation the drift (1) (a lock pin) has to be entered through the first cover of bearings of the camshaft into an opening in an asterisk (2) camshafts of inlet valves. Otherwise turn a bent shaft on a whole revolution and again insert a drift.

1. Take out a lock pin.
2. Establish a cover of a head of cylinders, address appropriate section.