1. Grease with a thin layer of special lubricant a nozzle core in the area "and", for example, MERCEDES-BENZ 001 989 42 51 10.
|
Lubricant should not get on a working part of a nozzle and on a sealing ring. |
2. Establish a nozzle into place with a new sealing ring and a coupling collar. 3. Screw the new Torx screw, without tightening it.
|
The screw has to be rolled easily. Otherwise the carving needs to be passed a lerka. |
4. Turn off bolts of fastening of the fuel distributive highway. It is necessary for installation of the pipeline of injection without additional effort. 5. Fix by a cap nut the injection pipeline on a nozzle, without tightening a nut. 6. Tighten bolts of fastening of the fuel distributive highway the moment of 14 Nanometers. 7. Fix the new Torx screw of a coupling collar by the moment of 7 Nanometers. Then tighten the screw on a corner 90 ° (Ѕ a turn). 8. Tighten cap nuts of fastening of the pipeline of injection, holding a nozzle from a provorachivaniye. Moment of an inhaling of a new nut: 20 Of Nanometer, again applied: 25 Of Nanometer.
|
Do not exceed the inhaling moment at all. Otherwise at the following otvorachivaniye the carving union will be not to turn off. |
9. Install into place the drainage pipeline and fix it a wire bracket. 10. Join the nozzle socket. 11. Establish the top covers of the engine, address the Section Removal and installation of the top cover of the engine. |