3648d64d

9.3.4. The AT electrohydraulic control unit (AT is established)

AT electrohydraulic control unit

2 — the Transmission
3 — the Pallet
3a — the Connector
3b, 19a — Bolts
4 — the Drain stopper
5 — the Oil filter
19 — the Electrohydraulic control unit 		21 — the Directing plug
26 — the 13-contact socket
62 — the Guard
and — the Opening under the sensor of frequency of rotation of n3 (Y3/6/2)
b — the Opening under the sensor of frequency of rotation of n2 (Y3/6/2)

Removal

 PERFORMANCE ORDER

1. Install the gear shifting selector lever in situation "P".
2. Remove a guard (62) and disconnect the 13-contact socket (26).
3. Weaken the directing plug (21) and remove it from transmission.
4. Merge transmission liquid, having turned off a stopper (4).
5. Remove the pallet (3).
6. Remove an oil filter (5).
7. Turn off bolts (19a) and remove the electrohydraulic block (19).


Installation

Installation is taken place in an order, the return to removal.