3648d64d

9.3.20. Removal and installation of the lever of the selector of gear shifting

Removal and installation of the lever of the selector of gear shifting (with the regime W/S switch)

39 — Laying
40 — Bolts (4 pieces)
97 — the Intermediate lever
S16/10 — the Switch of identification of the included transfer 		S16/10s2 — the Switch of lamps of a backing
Y66/1 — the Electromagnetic drive of blocking of provisions of "R/P"

Drive of management of AT

1 — the Cable of the central block of gear shifting
2 — the gear shifting lever Handle
3 — the Control unit of the indicator of transfers
4 — the Central block of gear shifting 		5 — the Tip of draft of switching
6 — Draft of gear shifting
7 — the Finger for draft connection

Removal

 PERFORMANCE ORDER

1. Remove the switching lever from the intermediate lever (97).
2. Remove the central console.
3. Turn off bolts (40).
4. Disconnect sockets and the electromagnetic drive of blocking of provisions of "R/P" (Y66/1) from the identification switch (S16/10), the switch of lamps of a backing (S16/10S2).
5. Remove the gear shifting selector lever assembled from a floor.


Installation

 PERFORMANCE ORDER

Installation is carried out as it should be, the return to removal. Check laying (39) and its state for correctness of installation if it is necessary, replace it.