9.1. Specifications
| |
Separate characteristics are provided also in the text of the Head and in case of obligation of their performance are highlighted in bold type. |
| General parameters | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Type | 5-staged, automatic with electronic control by gear shifting or 6-staged, automated by the Sequentronic check point
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Designation | 722.6 (W5A 330/580) or 716.6 respectively
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| The applied liquid 7.0 l, MB No. 001 989 21 03 10 9.0 l, MB No. 001 989 21 03 10 Codes of diagnostics of system of electronic control by automatic transmission see the Head Elektrooborudovaniye of the engine. Transfer relations and turning on of AT 722.6 activators | * Switching activators only in the mode kik-Down Main transfer | 3.06: 1 (3.27: 1)
| Fastenings of a back support of the engine/check point | Bolts (2) | 25
| Bolts (3) cross-pieces behind to a body | 40
| Bolt or nut of fastening of a support of the engine to the check point 50
| Driveshaft flange nuts to the check point: | M10 | 40
| M12 | 60
716.6
| | Plait of cables to RKPP |
| 15
|
| 10
| Holder of the socket of sensors of an angle of rotation | 10
| Holder of the central socket | 10
| Weight point at the check point | 10
| Stopper of removal of oil of the check point | 60
| Stopper of filling of the check point with oil 50
| Accumulator collar at a check point case 15
| Bolt of fastening of the sensor of an angle of rotation to a sensor level | 3
| The ventilation case at the check point 6
| The hydraulic block at the check point |
7.5
|
9.5
| The pump to a check point case 7.5
| Square to a check point case | 3
| The tank to a check point case | 9.5
| The bridge of the central block of gear shifting to the bottom | 23
| The backing lamp switch to a check point case | 10
| Payment of sensors to a check point case 3
| Lock plate to the check point | 9
| The connecting plug to the central axis of gear shifting 11.5
| The movement sensor to the coupling switching off lever | 3
| 722.6 | Oil stopper of AT 20
| Oil stopper of the AT hydrotransformer 16
| Pallet AT bolts | 8
| Lock screw of draft of the AT selector | 12
| Bolt of fastening of the hydrotransformer to a drive plate of M8 | 42
| Drain stopper in the transmission pallet 20
| Nut of fastening of the driveshaft to the M12 transmission | 60
| Bolt of fastening of the electromagnetic valve to a gear shifting plate 8
| Bolt of fastening of a cover of the case of valves to the case of M6x30 valves | 8
| Bolt of fastening of a side cover to a cover of the case of valves and the case of M4x12 valves 4
| Bolt of fastening of the case of transmission to the hydrotransformer case | 20
| Bolt of fastening of the pallet to the case of transmission 8
| | Nut of fastening of a flange of an output shaft | 200
| Bolt of fastening of the electrohydraulic control unit to the transmission case | 8
| Bolt of fastening of a multidisk brake of B2 to the transmission case 16
| Bolt of fastening of a doggie to the gear shifting selector lever | 8
| Drain stopper of the hydrotransformer | 16
| ||||||||||||||||||||||||