9.3.3. Removal and the AT installation with the hydrotransformer



1. Disconnect a negative wire from the battery.
2. Pick up the maslozalivny phone (61) from the engine.
3. Turn off a drain stopper (4) from the pallet of transmission and merge gearbox oil.
4. Turn off a drain stopper (9) from the hydrotransformer and merge gearbox oil.
5. Remove a guard (62) and disconnect the 13-contact socket (26).
6. Disconnect a cable (80) of inclusion of blocking at the parking.
7. Turn off bolts (95) of fastening of the hydrotransformer to a drive plate. Then uncover the hydrotransformer (81).
8. Turn off the left and right oil pipelines (49) from the oil heater.
9. Remove draft of gear shifting (63), having disconnected for this purpose a clamp.
10. Remove an arm (64) fastenings of an exhaust pipe.
11. Disconnect final system (94).
12. Remove a fan casing from a radiator.
13. Turn off a back arm of the engine with a support (65).
14. Unscrew the driveshaft (66).
15. Disconnect a connection wire on "weight" (46) from transmission.
16. Turn off bolts of fastening of transmission to the block of cylinders and remove it down at an angle.
17. Remove the hydrotransformer.


Installation is carried out as it should be, the return to removal.