3648d64d

13.2.8. Removal and installation of a cover of the top part of the central console

Removal

 PERFORMANCE ORDER

1. Disconnect a negative cable (-) of the rechargeable battery at the switched-off ignition. It is previously necessary to remove a box of the filter of air of salon.

Before a detachment of a cable find out a protective code of the radio receiver if that is available, address the Section Replacement of the Rechargeable Battery.

2. Remove the central air deflector.
3. Uncover the switching/selector lever as it is described in the Section Removal and installation of the central console.
4. Take out the ashtray case from the central console as it is described in the Section Removal and installation of the central console.

5. Open spring brackets (arrows on an illustration) below at a cover (1). (2) – the control unit of a heater from a reverse side of a cover.

6. Uncover the top part of the central console.
7. Disunite the socket of a heater and the switch of management from a reverse side of a cover.


Installation

 PERFORMANCE ORDER

1. Join the socket of a heater and the switch of management from a reverse side of a cover.

2. Establish a cover in the top part of the central console, enter spring brackets below in the lower part (shooters on an illustration) consoles (1) and record.

3. Further installation is carried out in the sequence, the return to removal.
4. Attach a negative cable (-) to the rechargeable battery at the switched-off ignition. Establish into place a box of the filter of air of salon. Enter a code of the radio receiver and determine time on hours.