3648d64d

13.2.11. Removal and installation of a front seat

Removal

 PERFORMANCE ORDER

1. Disconnect a negative cable (-) of the rechargeable battery at the switched-off ignition. It is previously necessary to remove a box of the filter of air of salon.

Before a detachment of a cable find out a protective code of the radio receiver if that is available, address the Section Replacement of the Rechargeable Battery.

2. Lower a head restraint and a steering wheel.
3. Displace a seat completely forward.

4. Uncover over a belt tip. Turn out a bolt at a tip.

5. Turn out 2 bolts behind at seat guides.

6. Displace a seat completely back. If there is a fire extinguisher, take out it from the holder and turn out 2 bolts in front at seat guides.

7. Disunite sockets (1) and (2) under a seat.

8. Take out a seat.


Installation

 PERFORMANCE ORDER

1. Establish a seat into place. At the same time the lock finger at guides of a seat has to enter an opening.
2. Join sockets under a seat.
3. Fix the directing seats in front and behind by the moment of 50 Nanometers.
4. Fix a belt tip bolt by the moment of 30 Nanometers.
5. Establish to the place of a cover.
6. Install the fire extinguisher in the holder.
7. Attach a negative cable (-) to the rechargeable battery at the switched-off ignition. Establish into place a box of the filter of air of salon. Enter a code of the radio receiver and determine time on hours.