1. Remove a fringing along A rack.

2. Disconnect by means of a plastic wedge facing on brackets (1) of a rack of A (an arrow on an illustration).

3. Take out facing from a guide on the dashboard up and remove it.

Installation is carried out in the sequence, the return to removal.

1. Shift a seat forward.
2. Disconnect a seat belt at a front seat as it is described in the Section Removal and installation of a front seat.
3. Remove a fringing along B rack door frame.

4. Take out by means of the screw-driver of a bracket (1) in the top part of a rack of B (an arrow on an illustration) and take out the top facing from the lower facing.

5. Take out a seat belt from the top facing.
6. Disconnect the lower facing at brackets (2) (an arrow on an illustration) and remove from B rack.

1. Insert brackets of the top facing into B rack.
2. Establish the lower facing at a rack of B and record it.
3. Carry out a seat belt through a groove in the top facing.
4. Establish the top facing at a rack of B and shift it under the lower facing.

5. Implant a finger (3) seat belts into a support for pass of a belt.

6. Insert a stopper (4) into the button of the mechanism of adjustment of a belt on height.
7. Record the top facing on B rack.
8. Establish a fringing on a door frame.
9. Check operation of the mechanism of adjustment of a belt on height.
10. Fix a seat belt by the moment of 30 Nanometers on a front seat.