1. Release a back seat and cast away it forward.
2. Displace a rug aside and turn off nuts of fastening of a seat belt under a seat.

3. Again cast away a seat back, uncover under a seat and turn off a nut (1) of fastening of a loop.

4. Remove a back seat from a floor and take out it.

5. Turn out a bolt (1) of fastening of a side pillow of a back of a back seat and take out a pillow breakthrough from the holder.

6. Displace a rug aside and turn off a bolt of fastening of a pillow between a back seat and a seatback.
7. Turn out a bolt of fastening of the lock of a seat belt on a car floor.
8. Turn out 2 bolts of fastening of a pin of a loop on the right outside at a wheel arch.
9. Turn out nuts of fastening of a collar on a car floor.
10. Release a seatback and cast away it forward.

11. Turn off other nuts (1) of fastening of a collar of a support (2).

12. Disconnect drafts of release of seatbacks.
13. Take out 1/3 right backs.
14. Remove 2/3 backs from the left pin of a loop.

Installation is carried out in the sequence, the return to removal.