3648d64d

14.8. Removal and installation of the sensor of daylight

The sensor of daylight is installed on a windshield at height of a rear-view mirror.


Removal

 PERFORMANCE ORDER

1. Disconnect a negative cable (-) of the rechargeable battery at the switched-off ignition. It is previously necessary to remove a box of the filter of air of salon.

Before a detachment of a cable find out a protective code of the radio receiver if that is available, address the Section Replacement of the Rechargeable Battery.


2. Uncover (1).

3. Disunite the socket (2).

4. Open by means of the screw-driver clips (arrows on an illustration) and remove the sensor of daylight (3).

The lens of the sensor is pasted on a windshield. The lens has to be replaced only with HUNDRED.


Installation

 PERFORMANCE ORDER

1. Insert and fix the sensor.
2. Join the sensor socket.
3. Establish and fix a cover, having pressed it.
4. Attach a cable of mass of the rechargeable battery at the switched-off ignition. Install into place a box of the filter of air of salon. If it is necessary, enter a code of the radio receiver and determine time on hours.