1. Remove ignition coils, address the Section Removal and installation of coils of ignition.
2. Disconnect ventilating hoses from a head of cylinders.
3. Disunite the socket of the sensor of position of the camshaft.
4. Remove a forward cover of the engine.
5. Disconnect a weight wire at a cover of a head of cylinders.
6. Take aside electric wires of coils of ignition.
7. Turn out 7 bolts of fastening (2) and uncover a head of cylinders (1).

Installation is carried out in the sequence, the return to removal. Replace sealing laying of a head of cylinders and alternately tighten bolts the moment of 10 Nanometers.

Lay electric wires in a cover of a head of cylinders and check whether consolidation between wires and a cover of a head of cylinders correctly lies.