8. Manual transmission
General view of RKPP6-staged RKPP 716.6
RKPP elements
Competent use of the 6th transfer allows to achieve essential economy of fuel consumption due to decrease in working turns of the engine. In view of design features.
6-staged transmissions have bigger weight, than 5-staged.
The box perceives torque from the engine by means of usual coupling of the dry type equipped with the automatic compensator of wear. The transmission has a tight design and is filled with the gearbox oil which is not needing replacement.
Accuracy and ease of the switchings of transmission having the short course is reached by the following features of a design:
· Shtokovo-trosovy execution of the drive of switching;
· Application of the central rod of switching fixed in needle bearings;
· Use of multiconical synchronizers of switchings of the 1st, 2nd, 3rd and 4th transfers;
· Full synchronization of the reverse gear.
Reduktorny assemblies with shaft are located between two bearing planes. The third bearing plane used in earlier 5-staged boxes in this design is eliminated.
The two-section separate case is made of light alloy and pressurized by means of a special liquid compound.
The entrance shaft (1) is recorded in a flywheel by means of the directing bearing, and a transmission case - by means of the ball bearing with a profound flute. Main (2) and entrance (1) shaft are jointed among themselves in the general plane of a case of transmission and fixed by means of ball bearings with a profound flute.
The intermediate shaft (3) has the facilitated hollow design and is fixed in the roller coupling and the ball bearing with a profound flute.
In view of the minimum production admissions of semi-cases and gear wheels, and also due to use of roller couplings, need for adjustment of axial side plays of shaft disappears.
Movements of the lever of gear shifting are transmitted through drafts on a box. The box can be removed without removal of the engine. It is necessary to remove a box at coupling removal, when replacing a box or its repair. It is not recommended to make repairs of a box in house conditions. Management of RKPP is described in the Head the Operation manual.