5.1.7. Removal and installation of the pump of cooling liquid
4-cylinder petrol engine
The pump of cooling liquid is located in front of the block of cylinders and is set in motion through klinoremenny transfer.
Removal
|
1. Merge cooling liquid, address appropriate section. 2. Remove the air filter, address the Section Removal and installation of the air filter. 3. Engine 111.955: remove the holder of the air filter. 4. Weaken a bolt of fastening of a pulley of the pump of cooling liquid. At the same time hold a pulley from a provorachivaniye, having clamped maple a belt. 5. Take off maple a belt, address the Section Removal and installation of a maple belt. 6. Disconnect and remove a pump pulley. 7. Remove hoses from the pump. Previously weaken collars and shift back. 8. Remove the pump from the block of cylinders.
|
Mark the provision of the bolts having various length. |
9. Clear the interfaced surfaces. |
|
Installation
|
1. Install into place the pump with new laying and fix it by bolts. 2. Further installation is carried out in the sequence, the return to removal. Fix a pulley by the moment of 10 Nanometers. 3. Fill the cooling system with liquid and remove air from system, address appropriate section. |
|
Petrol engine 112
Remove the tension device of a maple belt with the shock-absorber.
Diesel engines
|
|
Here only differences from the petrol engine are described. |
1. Wring out the screw-driver a cover of the central bolt of fastening of the rejecting roller of a maple belt. Disconnect the rejecting roller.
|
The bolt of fastening of the pump of cooling liquid is behind the rejecting roller. |
2. Remove a fuel hose from the shutdown valve, address also the Section Replacement of the Fuel Filter. 3. Disconnect the pump of cooling liquid.
|
The pump is fixed by bolts of various length therefore at removal it is necessary to mark the provision of bolts with a marker. |
4. Clear the interfaced surfaces. |
|